Porter-cable 447k Manual do Utilizador

Double InsulatedCircular SawInstructionmanualThe Model and Serial No. plate is located on the mainhousing of the tool. Record these numbers in thespac

10The saw can now be adjusted for a bevel cut between the normal stop (45°or 90°) and 3° beyond the normal stop.5. Position saw to desired angle and f

11LINE-OF-CUT INDICATORLine-of-cut indicator slots (Fig. 9), are provided at the front of the saw base.The right slot is used to follow a line when ma

12INSTALLING AND CARE OF DUST BAGA dust bag is available as an accessory. Install dust bag as follows:1. CAUTION: DISCONNECT TOOL FROM POWER SOURCE.2.

13cutting line with the line-of-cut indicator Fig. 9. Back saw up slightly and startmotor. Move saw forward keeping the edge of line indicator paralle

14BEVEL CUTTINGBevel cuts are made in the same manner as crosscuts and rip cuts. The onlydifference is that the blade is set at an angle between 0° an

15MAINTENANCEKEEP TOOL CLEANPeriodically blow out all air passages with dry compressed air. All plasticparts should be cleaned with a soft damp cloth.

16PORTER-CABLE LIMITEDONE YEAR WARRANTYPorter-Cable warrants its Professional Power Tools for a period of one year from the date of originalpurchase.

The following are trademarks of PORTER-CABLE •DELTA (Las siguientes son marcas registradas de PORTER-CABLE •DELTA S.A.) (Lesmarques suivantes sont des

2WARNING: SOME DUST CREATED BY POWER SANDING, SAWING,GRINDING, DRILLING, AND OTHER CONSTRUCTION ACTIVITIEScontains chemicals known to cause cancer, bi

32. Dress properly. Do not wear loose clothing or jewelry. Contain longhair. Keep your hair, clothing, and gloves away from moving parts.Loose clothes

4SPECIFIC SAFETY RULES AND SYMBOLS FOR CIRCULARSAWS1. DANGER! Keep hands away from cutting area and blade. Keep yoursecond hand on auxiliary handle or

14. Maintain a firm grip on the saw and position your body and arm in away that allows you to resist KICKBACK forces. KICKBACK forces can becontrolled

63 ... three-phase alternating current3N ... three-phase alternating current with neutral...

FUNCTIONAL DESCRIPTIONFOREWORDYour Porter-Cable circular saw is designed for use with 71/4" diameter bladesthat have a 5/8" diameter bore. B

8TELESCOPING GUARDWARNING: The telescoping guard (A) Fig. 3, is a safety deviceimportant to your protection. Every time you use the saw, see thatthe t

9TO ADJUST FOR BEVEL CUTS1. CAUTION: DISCONNECT TOOL FROM POWER SOURCE.2. Loosen the bevel adjusting knob (A) Fig. 5.3. Tilt saw base until desired gr